Chicken Strips UV DTF Sticker Pack 03 – Full Send

Description

Not your average sticker pack. This Chicken Strips pack is made with premium UV DTF transfer technology for bold, hard-wearing designs that can be applied to almost any smooth, hard surface.

Pack 03 – Full Send is supplied as one sheet approximately 25 cm wide x A4 height (29.7 cm). Every pack includes 3 visor stickers plus a selection of matching stickers and designs.

Made for more than notebooks

Use them on helmets, bikes, cars, vans, toolboxes, laptops, phone cases, bottles and workshop kit. The UV DTF finish gives a clean, vibrant result without the need for water or heat.

How to apply

1. Cut around the design, leaving a small border where practical.
2. Clean the surface thoroughly with isopropyl alcohol and let it dry completely. Do not use wax, polish or silicone-based cleaner.
3. Rub over the transfer film firmly, then peel away the backing paper slowly.
4. Place the sticker carefully, press from the centre outwards and rub firmly over the whole design.
5. Peel the transfer film back slowly at a low angle. Re-press any detail that needs extra contact.
6. Allow at least 24 hours before washing, heavy handling or exposing it to rain.

These are not waterslide stickers. Do not soak them in water or apply them like waterslide decals.

Vehicle and bike application

For cars, vans and bikes, apply only to clean, smooth, sound paintwork or other suitable hard surfaces. Avoid rubber, fabric, tyres, unpainted or textured plastic, fresh paint, hot areas, exhausts, brakes, moving joints and sharp panel edges. Keep clear of lights, reflectors, number plates, controls, safety labels and any visibility-critical area. Hand wash gently around the edges and avoid pressure-washing directly at the sticker.

Price: £10 per pack. Sticker postage is £2.